Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 14)

Publication 1760-UM002B-EN-P - March 2005
Preface 2
Related Documentation The following documents contain information that may be helpful to you as
you use Allen-Bradley SLC products. If you would like a manual, you can:
• download a free electronic version from the internet:
• www.theautomationbookstore.com
• purchase a printed manual by:
– contacting your local distributor or Rockwell Automation
representative
– visiting www.theautomationbookstore.com and placing your
order
– calling 1.800.963.9548 (USA/Canada)
– or 001.330.725.1574 (Outside USA/Canada)
For Read this Document Document Number
Introduction to using PicoSoft Pro software Pico GFX-70 Controllers Quick Start 1760-QS002A-EN-P
Installation and mounting procedures for the processor Pico GFX-70 Processors Installation
Instructions 1760-IN004A-MU-P
Installation and mounting procedures for the display unit Pico GFX-70 Display Units Installation
Instructions 1760-IN005A-MU-P
Installation and mounting procedures for the I/O modules Pico GFX-70 I/O Modules Installation
Instructions 1760-IN006A-MU-P
Installation and mounting procedures for the serial interface cable Pico GFX-70 Serial Interface Cable
Installation Instructions 1760-IN007A-MU-P
In-depth information on grounding and wiring Allen-Bradley
programmable controllers Allen-Bradley Programmable Controller
Grounding and Wiring Guidelines 1770-4.1
A description of important differences between solid-state programmable
controller products and hard-wired electromechanical devices Application Considerations for
Solid-State Controls SGI-1.1
An article on wire sizes and types for grounding electrical equipment National Electrical Code - Published by the National Fire
Protection Association of Boston, MA.
A complete listing of current documentation, including ordering
instructions. Also indicates whether the documents are available on
CD-ROM or in multi-languages. Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation
Glossary AG-7.1