Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 323)

Publication 1760-UM002B-EN-P - March 2005
Pico-Link and Point-to-Point Serial Connections 6-17
Establishing a Serial Interface connection to a Pico-Link station.
Figure 6.6 Pico-Link operation and Serial Interface connections.
A Serial Interface connection can be established with a Pico-Link station. The
same conditions apply here as with operation without Pico-Link.
Data accesses via Serial Interface
The following data access operations are possible from the active station to the
remote station:
Write/read accesses in the marker range
Active station, read Remote station
Inputs 1I01 to 1I16 I01 to I16
Inputs of local expansion unit 1R1 to 1R16 R01 to R16
Outputs 1Q01 to 1Q08 Q01 to Q08
Outputs of local expansion unit 1S01 to 1S08 S01 to S08
Pico-Link diagnostics bits 1ID01 to 1ID08 ID01 to ID08
Analog inputs 1IA01 to 1IA04 IA01 to IA04
Analog output 1QA01 QA01
GFX-70
GFX-70
GFX-70
GFX-70