Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 353)

Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-25
Changing the Operating Mode or the Circuit Diagram
When the operating mode is changed or the Pico GFX-70 circuit diagram is
modified, the retentive data is normally saved together with their actual values.
The actual values of relays no longer being used are also retained.
Changing the Operating Mode
If you change from RUN to STOP and then back to RUN, the actual values of
the retentive data will be retained.
Modifying the Circuit Diagram
If a modification is made to the Pico GFX-70 circuit diagram, the actual values
will be retained.
Changing the Startup Behavior in the SYSTEM Menu
The retentive actual values are retained in Pico GFX-70 regardless of the
setting.
Modification of the Retentive Range
If the set retentive ranges are reduced, only the actual values saved in the range
will remain.
If the retentive range is extended, the older data is retained. The new data is
written with the current actual values in RUN mode.
Displaying Device
Information Device information is provided for service tasks and for determining the
capability of the device concerned.
This function is only available with devices featuring a display.
Exception: Terminal mode with Pico GFX-70.
The device enables the display of the following device information:
• AC or DC power supply
• T (transistor output) or R (relay output)
• C (clock provided)
• A (analog output provided)
• LCD (display provided)
• Pico-Link (Pico-Link provided)
• OS: 1.10.204 (operating system version)