Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 341)

Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-13
Selecting DST
Pico GFX-70 shows you the options for the DST change.
The standard setting is NONE for automatic DST changeover (Tick at
NONE).
1. Select the required variant.
2. Press the OK button.
Manual selection
You want to enter your own date.
1. Proceed to the MANUAL menu and press 2 x OK.
– Left and right arrow keys to move between the parameters
– Up and down arrow keys to change the value.
– OK Save day and time
– ESC Retain previous setting.
2. Press ESC to leave the display.
3. Select the day and time at which summer time is to commence.
4. Select the day and time at which summer time is to end.
NONE
✓ ▲
MANUAL
EU
GB
▼
US
SUMMERTIME START
DD.MM 00.00
SUMMERTIME END
DD.MM: 00:00
IMPORTANT
The following applies to Pico GFX-70 devices:
The time change algorithm always calculates the date from
the year 2000. Enter the time change for the year 2000.
IMPORTANT
The same time for conversion applies as for the legally
determined variants (EU, GB, US).