Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 134)

Publication 1760-UM002B-EN-P - March 2005
4-24 Wiring with Pico GFX-70
Saving Circuit Diagrams
1. Press the ESC button to save a circuit diagram.
The menu on the left appears in the status line.
2. Press OK to save the entire program, circuit diagram and function
blocks.
After saving you will be in the CIRCUIT DIAGRAM menu.
Aborting Circuit Diagram Entry
1. If you want to exit without saving the circuit diagram, press ESC.
2. Use the arrow buttons to select the CANCEL menu.
3. Press OK.
The circuit diagram is closed without saving.
Searching for Contacts and Coils
You can search for contacts and coils in the following way:
1. Press ESC. Use the arrow buttons to select the SEARCH menu.
2. Press OK.
3. Select the desired contact, coil and number.
With function relays, select the function block, the number and the coil.
4. Confirm the search with the OK button.
I 01----I 02---
Q 01----HY01Q1-
|
▲
SAVE
▼
I 01----I 02---
Q 01----HY01Q1- |
▲
CANCEL
▼
I 01----I 02---
Q 01----HY01Q1- |
▲
SEARCH
▼
I 01----I 02---
Q 01----HY01Q1- |
SEARCH I 01