Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 130)

Publication 1760-UM002B-EN-P - March 2005
4-20 Wiring with Pico GFX-70
Values for contacts and coil fields are changed in Entry mode. The value to be
changed flashes.
1. Move the cursor using the arrow buttons to a contact or coil field.
2. Press OK to switch to Entry mode.
3. Use left and right arrow buttons to select the position you wish to
change, or press OK to jump to the next position.
4. Use the up and down arrow buttons to modify the value at the position.
Pico GFX-70 will leave Entry mode when you press left, right, or OK to
leave a contact field or coil field.
I 01
IMPORTANT
Pico GFX-70 proposes the contact
I 01
or the coil
[ Q 01
when starting entries in an empty field.
In the contact field to change In the coil field change
I 01 I 01 I 02 Ä Q 01 Ä Q 01 Ä Q 01 Ä Q 08
Q
>
or
OK
02 Н д
<
M
>
or
OK
02
M 03 S T 03
HW 04 R
И
и
Е C .
C 05 D .
T . S .
P . : 08
D . …
S 99
>
or
OK >
or
OK
:
… … .
I 01 to I 02 [ Q 01 to S Q 08
>