beautypg.com

Behavior when the circuit diagram is deleted, Behavior during upload/download to module or pc – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual

Page 345

background image

Publication 1760-UM002B-EN-P - March 2005

Pico GFX-70 Settings 7-17

Activating RUN Mode

If Pico GFX-70 displays

RUN MODE

, this means that Pico GFX-70 will start

in Run mode when the supply voltage is applied.

1.

Otherwise select RUN MODE and press OK.

RUN mode is activated.

2.

Press ESC to return to the Status display.

Deactivating RUN Mode

1.

Select

RUN MODE

.

2.

Press OK.

The RUN mode function is deactivated.

The default setting for Pico GFX-70 is for RUN MODE to be displayed. In
other words, Pico GFX-70 starts in

RUN MODE

when the power is switched

on.

Behavior When the Circuit Diagram is Deleted

The setting for the startup behavior is a Pico GFX-70 device function. When
the circuit diagram is deleted, this does not result in the loss of the setting
selected.

Behavior During Upload/Download to Module or PC

When a valid circuit diagram is transferred from Pico GFX-70 to a memory
module or the PC or vice versa, the setting is still retained.

DEBOUNCE

P BUTTONS

RUN MODE

CARD MODE

DEBOUNCE

P BUTTONS

RUN MODE

CARD MODE

Startup behavior

Menu display

Status of Pico GFX-70
after startup

Pico GFX-70 starts in STOP
mode

RUN MODE

Pico GFX-70 is in STOP mode

Pico GFX-70 starts in RUN
mode

RUN MODE

Pico GFX-70 is in RUN mode

IMPORTANT

The GFX models without a display can only be started in
RUN mode.