Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 56)

Publication 1404-UM001D-EN-E - October 2004
3-30 Powermonitor 3000 Operations
Time IP address
The IP address of the primary SNTP server, accessed as the 1
st
through
4
th
octet
World time zone
Sets the time zone of the Powermonitor 3000. Range: -12 = GMT -
12:00 - Eniwetok, Kwajalein; -11 = GMT - 11:00 - Midway Island,
Samoa; ...; 12 = GMT - 12:00; Fiji, Kamchatka, Marshall Island.
Time-set interval
Determines how often the unit time is automatically set, in seconds.
Range: 0 to 32,766. 0 = Disables the time set function, Default = 60
SNTP address 2
The IP address of the primary SNTP server, accessed as the 1
st
through
4
th
octet. Available only in master module firmware version 2.5x and
later
SNTP address 3
The IP address of a third SNTP server, accessed as the 1
st
through 4
th
octet. Available only in master module firmware version 2.5x and later
Table 3.8 Network demand/time configuration summary
Parameter name Range Default User Setting
Input mode 0-3 3
Broadcast port number 300 to 400 300
Time server IP address-byte 1 0 to 255 0
Time server IP address-byte 2 0 to 255 0
Time server IP address-byte 3 0 to 255 0
Time server IP address-byte 4 0 to 255 0
Time zone -12 to 12 0
Time set update interval 0 to 32766 60
SNTP IP address 2, octet 1 0-255 0
SNTP IP address 2, octet 2 0-255 0
SNTP IP address 2, octet 3 0-255 0
SNTP IP address 2, octet 4 0-255 0