Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 333)

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 ControlNet Device Profile G-9
Common Services
The PCCC Object does not support any common services.
Class-Specific Service
Execute PCCC Service
The Execute PCCC service is sent by a remote application to perform
a PCCC request. The service accepts the following request parameters,
which represent a completely encapsulated PCCC command:
Table G.16 PCCC Object Class-Specific Service
Service
Code Class/Instance
Usage Service Name
0x4B Instance Execute PCCC
Table G.17 PCCC Object Request Parameters
Name Data Type Parameter
Description Semantics of Values
Length USINT Length of Requestor
ID Number of bytes,
including Length, Vendor,
Serial Number and other
fields.
Vendor UINT Vendor Number of
requester Same as the attribute in
the Device Object of the
same name.
Serial Number UDINT ASA serial number of
requestor Same as the attribute in
the Device Object of the
same name.
Other Product Specific Identifier of user,
task, etc. on the
requester Product specific
CMD USINT Command Byte Refer to PCCC
specification
STS USINT 0 Must be 0 on PCCC
requests