Performance features, Performance features -4 – Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 User Manual
Page 16
Publication 1404-UM001D-EN-E - October 2004
2-4 Product Description
Performance Features
The Powermonitor 3000 is available in four basic models, designated
M4, M5, M6 and M8. Each model offers specific functionality as
indicated in the table below. The M5 model offers M4 functionality
and can be field-upgraded to an M6 or M8 model for an additional
charge.
Table 2.1 Product Features of Powermonitor 3000 Module
M4 M5 M6 M8
Master
Module
Features
•
•
•
•
Voltage, current, power measurements and display
•
•
•
•
Compatible with PLC-5, SLC 500, and ControlLogix
•
•
•
•
Compatible with RSLinx, RSPower32, RSEnergyMetrix and
RSView32
•
•
•
•
Output control via control relays or PLC
•
•
•
•
Demo mode for training
•
•
•
•
10 user configurable setpoints
•
•
•
•
Discrete condition monitoring via status inputs
•
•
•
•
Electronic KYZ pulse output
•
•
•
•
Form C ANSI C37.90-1989 rated relay for direct breaker tripping
•
•
•
•
Time stamped data logging of system measurements and events
•
•
•
•
Configurable trend log, up to 45,000 records deep
•
•
•
•
Event log 50 records deep
•
•
•
•
Firmware upgrades without removing module
•
•
•
•
Total harmonic distortion (THD) and Crest Factor
•
•
•
•
Automatic network-based time synchronization via SNTP (for
Ethernet Series B)
•
•
•
•
Daylight Savings Time (Master Module FRN 2.5x)
•
•
•
ANSI C12.20 Class 0.5 revenue metering accuracy
(1)
(1) Class 0.2 revenue metering accuracy available as an extra-cost option.
•
•
•
EN60687 Class 0.5 revenue metering accuracy
(1)
•
•
•
Canadian Revenue Meter specification accuracy
•
•
•
Field upgradeable to M6 or M8 (extra cost option)
•
•
10 additional setpoints with more options
•
•
Event Log an additional 50 records deep
•
•
User configurable oscillography up to 400 cycles @ 60 Hz
•
•
TIF, K-factor and IEEE-519 Pass/Fail
•
•
Sag and swell detection with oscillogram capture
•
•
Load factor log 12 records (months) deep
•
•
Calculates amplitude and % distortion for harmonics 1 to 41
•
Calculates amplitude and % distortion for harmonics 1 to 63
•
Sub-cycle transient capture and metering
•
Event Log with user comment entry
•
Transducer and Energy Meter modes with improved update rate