Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 191)

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 Data Tables A-17
Table A.9 Metering Voltage, Current and Frequency Result
CSP File No. F15
Remote I/O BT 38
CIP Assy. Inst. 14
No. of Elements 14
User Configurable No
Data Type Floating point
Data Access Read only
PM3000 Type All
Element
No. Modbus
Address Element name Units Range Comment
0 30101-2 L1 Current Amps (A)
0.0 to 999.9x10
21 Refer to Voltage, Current and Frequency Results on
page 3-4.
1 30103-4 L2 Current
0.0 to 999.9x10
21
2 30105-6 L3 Current
0.0 to 999.9x10
21
3 30107-8 Avg. Current
0.0 to 999.9x10
21
4 30109-10 L1-N Voltage Volts (V)
0.0 to 999.9x10
21
5 30111-12 L2-N Voltage
0.0 to 999.9x10
21
6 30113-14 L3-N Voltage
0.0 to 999.9x10
21
7 30115-16 Avg. L-N Voltage
0.0 to 999.9x10
21
8 30117-18 L1-L2 Voltage
0.0 to 999.9x10
21
9 30119-20 L2-L3 Voltage
0.0 to 999.9x10
21
10 30121-22 L3-L1 Voltage
0.0 to 999.9x10
21
11 30123-24 Avg L-L Voltage
0.0 to 999.9x10
21
12 30125-26 Frequency, last cycle Hertz (Hz) 40.0 to 75.0 Returns 0 or 999.0 if out of range
13 30127-28 Metering iteration - 0 to 32767 Increments by 1 to 32767, rolls over to 0