Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 231)

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 Data Tables A-57
Table A.46 Transient Capture Results
CSP File No. N46
Remote I/O BT 60
CIP Assy. Inst. 57
No. of Elements 29 (DeviceNet only); 59 (All other communications types)
User Configurable No
Data Type Integer
Data Access Read only
PM3000 Type M8 only
Element
No. Modbus
Address Element name Range Comment
0 - Timestamp; Month/day
Hour/minute
Second/hsec
0000 to 1231 Capture trigger timestamp, see page 4-18.
1 - 0000 to 2359
2 - 0000 to 5999
3 - Capture # 1 to 6 Refer to Reading Transient Capture Data on page 8-21.
4 - Channel number 1 to 7
5 - Block number See page 8-22
6 - Reserved 0
7 - Unique Transient Capture ID 0 to 30000
8 - Reserved 0
9 - Data Point 1 -8192 to 8191
10 - Data Point 2
11 - Data Point 3
12 - Data Point 4
13 - Data Point 5
14 - Data Point 6
15 - Data Point 7
16 - Data Point 8
17 - Data Point 9
18 - Data Point 10
19 - Data Point 11
20 - Data Point 12
21 - Data Point 13
22 - Data Point 14
23 - Data Point 15
24 - Data Point 16
25 - Data Point 17
26 - Data Point 18
27 - Data Point 19
28 - Data Point 20