Rockwell Automation 294E ArmorStart LT EtherNet/IP Version - User Manual User Manual

Page 90

Rockwell Automation Publication 290E-UM001B-EN-P - June 2012

Chapter 3

Product Commissioning

Table 15 - Bulletin 294E Produced Assembly/Status Tag Explanation

Device Input Status Tags

Tag Description/Use

Fault

Communication fault between PLC and device (all 1s = fault, all 0s = normal)

TripPresent

Fault exists within unit

WarningPresent

Warning of potential fault

RunningForward

Motor commanded to run forward

RunningReverse

Motor commanded to run reverse

Ready

Control and 3-phase power present

NetworkControlStatus

Start and Stop command comes from network (PLC or Connected Explicit Messaging)

NetworkReferenceStatus

Speed reference comes from the network (not DeviceLogix)

AtReference

At commanded speed reference

DeviceLogixEnabled

DeviceLogix is enabled

KeypadAuto

HOA is in Auto mode

KeypadOff

HOA is in Off mode

KeypadHand

HOA is in Hand mode

KeypadJogging

HOA is in Jog mode

DisconnectClosed

Disconnect is closed

BrakeContactorStatus

Source brake contactor status (1 = close, 0 = open)

OutputFrequency

VFD frequency

Pt00Data

User-configured I/O status

Pt01Data

User-configured I/O status

Pt02Data

User-configured I/O status

Pt03Data

User-configured I/O status

Pt04Data

ASLT_DEMO:I.Pt04Data

Pt05Data

User-configured I/O status

Pt00DeviceOut