Lenze E94AYAE SM301 - Manual (Page 25)

Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
25
3 Safe configuration
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Safe configuration
The SM301 safety module can be safely configured in the »Engineer« on the Safe configuration tab
for the SM301 safety module
The parameters of the safety module are divided into different groups according to their functions.
• A group is selected via the Parameter groups  list field.
• For a better overview, some parameter groups are divided again into functional subgroups
which can be selected via the buttons  on the left.
• In the parameter list  all parameters of the parameter group/subgroup selected are displayed.
• The Value field serves to change the corresponding parameter value.
 Changing parameter settings ( 26)
• The context menu (right mouse button) provides functions for the import/export of the
parameter settings.
 Importing/exporting parameter settings ( 27)

Tip!
If you place the mouse pointer on a parameter, further information on the parameter will
be displayed in a pop-up window.
If you select the entry "All parameters" in the Parameter groups list field, all parameters of
the safety module are displayed on the tab.
The FilePrint command in the »Engineer« menu bar serves to print all parameter settings
of the safety module for the purpose of documentation.