Lenze E94AYAE SM301 - Manual (Page 114)

6 Error messages
114
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
F_CRC_Length error [0x012f0045]
F parameter version is incorrect [0x012f0046]
PROFIsafe CRC1 error [0x012f0047]
Reserved (PROFIsafe standard) [0x012f0048]
Reserved (PROFIsafe standard) [0x012f0049]
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 69
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The data length of the F_CRC of the control system is
faulty.
Check the safety parameters in the control system.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 70
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The F parameter version is incorrect and not supported
by the safety module.
Select a permissible F parameter version in the control
system.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 71
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
PROFIsafe-CRC1 error. Current F parameter CRC is faulty. • Check F parameter CRC (CRC1) in the control system.
• Check GSD file.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 72
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
-- --
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 73
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
-- --