Ss1/ss2: stopping time exceeded [0x012f0061, Sls1: nlim1 exceeded [0x012f0062, Sls2: nlim2 exceeded [0x012f0063 – Lenze E94AYAE SM301 User Manual
Page 116: Sls3: nlim3 exceeded [0x012f0064, 0x012f0062, 0x012f0063, 0x012f0064, 0x012f0061, 0x012f005e, 6error messages
![background image](/manuals/565743/116/background.png)
6
Error messages
116
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Test pulse error - internal disconnecting path [0x012f005e]
SS1/SS2: Stopping time exceeded [0x012f0061]
SLS1: Nlim1 exceeded [0x012f0062]
SLS2: Nlim2 exceeded [0x012f0063]
SLS3: Nlim3 exceeded [0x012f0064]
Module ID (decimal)
Error ID (decimal)
303: SM301 safety module
94
Response (Lenze setting printed in bold)
None System error Error Fault Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Internal error of safe switch-off logic.
Replace safety module. Contact Lenze.
Module ID (decimal)
Error ID (decimal)
303: SM301 safety module
97
Response (Lenze setting printed in bold)
None System error Error Fault Quick stop by trouble Warning locked Warning Information
Cause
Remedy
The drive has not reached the parameterised zero-speed
threshold within the stop time.
• Increase SS1/SS2 stop time.
• Reduce delay time in drive.
Module ID (decimal)
Error ID (decimal)
303: SM301 safety module
98
Response (Lenze setting printed in bold)
None System error Error Fault Quick stop by trouble Warning locked Warning Information
Cause
Remedy
The drive has exceeded the limited speed (SLS1).
• Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.
Module ID (decimal)
Error ID (decimal)
303: SM301 safety module
99
Response (Lenze setting printed in bold)
None System error Error Fault Quick stop by trouble Warning locked Warning Information
Cause
Remedy
The drive has exceeded the limited speed (SLS2).
• Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.
Module ID (decimal)
Error ID (decimal)
303: SM301 safety module
100
Response (Lenze setting printed in bold)
None System error Error Fault Quick stop by trouble Warning locked Warning Information
Cause
Remedy
The drive has exceeded the limited speed (SLS3).
• Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.