Lenze E94AYAE SM301 - Manual (Page 124)

6 Error messages
124
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Safety parameter set communicaton error [0x012f00a8]
Module ID unequal effective safety address [0x012f00a9]
Reference voltage error [0x012f00c0]
6V voltage error [0x012f00c1]
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 168
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
A communication error has occurred when loading the
parameter set.
• Check whether memory module and safety module
have been installed correctly.
• Repeat parameter set transfer.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 169
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The module ID in the parameter set does not correspond
to the effective safety address.
Adjust module ID, safety address and DIP switch for
setting the safety address.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 192
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The threshold value of the reference voltage in the safety
module has been exceeded or fallen below the limit
value.
Replace safety module.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 193
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The threshold value of the 6 V voltage in the safety
module has been exceeded or fallen below the limit
value.
Replace safety module.