SkyTrak 3606 Service Manual - Manual (Page 59)

General Information, Specifications, and Maintenance
2-43
Figure 2–82. Alternately turn parking brake release
bolts A, B and C outward until torque decreases
(current production vehicles).
3. Use a torque wrench to alternately turn parking brake
release bolts A, B and C outward (counter-clockwise)
until the torque decreases sharply.
4. For early production vehicles, see Fig. 2–81; for
current production vehicles, see Fig. 2–82.
Alternately turn parking brake release bolts A, B and
C outward (counter-clockwise) until the bolt flanges
begin to press against the snap ring. Then, turn each
bolt inward (clockwise) one-quarter turn.
5. The parking brakes should now be re-activated and
the front wheels locked. Carefully remove the
blocking from the four tires.
6. Verify that the parking brake works.
7. Remove the Accident Prevention Tags from the
ignition switch and steering wheel.
A
C
B
FRONT
MS2610
Turn
Counter-clockwise
to Activate Brake
Steering
Cylinder (ref.)
Brake
Release
Bolt Snap
Ring
Left Side, Cross-section
of Front Axle
CURRENT PRODUCTION
Model 3606 • Origin 10/99