SkyTrak 3606 Service Manual - Manual (Page 26)

Section 2
2-10
2.5.4 Hydraulic System
A. Hydraulic Fluids
The hydraulic system is factory filled with ISO Grade 46
anti-wear hydraulic oil. When filling the hydraulic system,
use an anti-wear hydraulic oil meeting ISO Grade 46 with
-40°F (-40°C) pour point/ASTM viscosity SUS 215 at
100°F (38°C), or a 10W motor oil that meets the require-
ments of U.S. ordinance specification MIL-L-2104C.
Products known to meet these requirements include:
• AMOCO RYKON 46
• ARCO DURO AW S-215
• BENZ PETRAULIC 46-7C
• CASTROL AGRICASTROL HDD
• CASTROL/DEUSOL CRD
• CHEVRON AW HYDRAULIC OIL 46
• CITGO PACEMAKER XD-46
• ESSO ESSOLUBE D-3HP
• ESSO ESSOLUBE XD-3
• GULF HARMONY 46 AW
• ISO-46 HYDRAULIC OIL
• MOBIL DTE-25
• SAE 10W MOTOR OIL
• SHELL RIMULA CT
• SHELL RIMULA TX
• SHELL RIMULA X
• SHELL TULLUS 46
• SUN SUNVIS 821 WR
• TEXACO RANDO HD 46
Note: For -30°F to +70°F (-34°C to 21°C), 5W20 motor
oil with -50°F (-45°C) pour point can be substituted. How-
ever, above 70°F (21°C), hydraulic system oil must be
changed to ISO-46 hydraulic oil or SAE 10W motor oil.
B. Hydraulic System Capacity
System capacity ................................... 59.5 gal (225,2 l)
Reservoir capacity ................................ 32.2 gal (121,9 l)
2.5.5 Engine
A. Engine Fluids and Lubricants
1. Engine oil:
Diesel Engine Oil, SAE 10W-30, or 15W40
In general, use a premium-quality 10W-30 diesel engine
(motor) oil. Additives are not necessary. For most climates,
use 15W40 motor oil that meets API, CD or CE (severe
duty diesel engine) specifications. In cold climates where
ambient (outside air) temperatures are consistently below
32°F (0°C), 10W30 motor oil can be used; however, con-
tinuous use of low viscosity oil may cause premature
engine wear.
2. Cooling system (engine coolant):
In general, use a 50/50-mix of premium-quality ethylene
glycol (commonly referred to as “anti-freeze/anti-boilover”)
and water. Additives are not necessary.
3. Fuel:
In general, use No. 2 diesel fuel. From November 15 to
March 15 when operating in cooler climates where ambi-
ent (outside air) temperatures are consistently at or
below 32°F (0°C), use a 50/50 mix of #1 and #2 diesel
fuels. Use good quality diesel fuel and change the fuel
filter regularly. Additives are not necessary.
B. Engine Capacities
1. Engine oil capacity:
TOTAL CAPACITY FILTER
WITH FILTER CHANGE CAPACITY
Cummins Turbo ......... 11.6 qt (11,0 l)............ 1.3 qt (1,2 l)
Perkins Turbo ............ 9.0 qt (8,5 l)............... 1.5 qt (1,5 l)
Perkins Natural.......... 9.0 qt (8,5 l)............... 1.5 qt (1,5 l)
2. Cooling system capacity (w/o heater):
Cummins Turbo ......... 5.0 gal (18,9 l)
Perkins Turbo ............ 5.0 gal (18,9 l)
Perkins Natural.......... 5.0 gal (18,9 l)
Coolant system overflow bottle capacity:
CAPACITY CAPACITY
W/O HEATER W/ HEATER
Overflow bottle .......... 3.0 qt (2,8 l)............... 3.0 qt (2,8 l)
3. Fuel tank capacity:
Total capacity ............ 35.1 gal (132,8 l)
Usable capacity......... 33.6 gal (127,2 l)
Model 3606 • Origin 10/99