Legend for cab harness (s/n 8249 and before) – SkyTrak 3606 Service Manual User Manual
Page 322
Section 10
10-4
Model 3606 • Origin 10/99
1. Cab Harness
2. Back-up Alarm
3. Hex-lock Elastic Nut, 1/4-20
4. Flat Washer, 1/4”
5. Boom Sensor
6. Service Brake Switch
7. Logic Board
8. Button-head Capscrew, #10-32 x 3/4
9. Well Nut, #10-32
10. Steer Select Switch
11. Switch Bezel
12. Operators Display Panel
13. Park Brake Switch
14. Round-head Wood Screw, #6 x 1/2”
15. Hourmeter
16. Machine Bushing Washer,
0.63” I.D.
17. Ignition Switch
18. Ignition Key
19. Fuse, 7.5 Amp
20. Fuse, 40 Amp
21. Fuse, 15 Amp
(optional Perkins cold start only)
22. Sealed Relay, 12 Volt, 40 Amp
23. Slotted Pan-head Screw,
#10-24 x 3/4”
24. Narrow Flat Washer, #10
25. Slotted Pan-head Screw,
#10-24 x 5/8”
26. Hex-lock Elastic Nut, #10-24
27. Flat Washer, 1/4”
28. Lockwasher, 1/4”
29. Hex Nut, 1/4-20
30. Plastic Tie
31. Hex Jam Nut, M6-1 Cl4
32. Lockwasher, M6
33. Signal Horn
34. Tube Clip
35. Hex Locknut, 1/2-13
36. Attachment Tilt Mode Switch
37. Attachment Tilt Direction Harness
Legend for Cab Harness (S/N 8249 and before)