Allied Telesis AT-S25 - Manual (Page 89)

AT-S25 Management Software User’s Guide
89
Deleting a Port Mirror
To delete a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Ports Menu.
2. From the Ports Menu, type 2 to select Port Mirroring.
The Port Mirroring menu in Figure 26 on page 87 is displayed.
3. Type 3 to select Destination Port.
The following prompt is displayed.
Enter Destination Port: (01-24) (0=None):
4. Enter 0 and press the Enter key.
5. Type S to select Save Configuration changes.
The port mirror on the switch is now deleted. The port that was
functioning as the port mirror is now available for normal network
operations.