Allied Telesis AT-S25 - Manual (Page 184)

Section II: Local and Telnet Mangement
184
Figure 63 Downloads & Uploads Menu
Downloading
An Image File
To download a new image file onto a switch, perform the following
procedure:
1. From the Main Menu, type 4 to select Administration Menu.
2. From the Administration Menu, type D to select Downloads & Uploads
Menu.
3. To download a new image file onto the switch, type 1 to select
Download Image through Xmodem/TFTP.
The following prompt is displayed:
Download Method/Protocol [X-Xmodem, T-TFTP]:
❑ To download a file using Xmodem, perform the following steps:
a. Type X and press the Enter key. The following prompt is
displayed:
The System is now ready for download. Please
start your XMODEM transfer.
b. The file transfer of the new management software image is
now begun.
Note
The transfer protocol must be Xmodem or 1K Xmodem. For faster
transfer, 1K Xmodem is preferable.