Allied Telesis AT-S25 - Manual (Page 52)

Section II: Local and Telnet Mangement
52
Configuring SNMP Community Strings and Trap IP Addresses
To configure the SNMP community strings for the switch and to assign
up to four IP addresses of management stations to receive traps from
the switch, perform the following procedure:
1. From the Main Menu, type 5 to select System Config Menu.
The System Config Menu in Figure 12 is displayed.
Figure 12 System Config Menu
2. From the System Config Menu, type A to select Advanced
Configuration.
The Advanced Configuration menu in Figure 13 is displayed.
Figure 13 Advanced Configuration Menu