Allied Telesis AT-S25 - Manual (Page 156)

Section II: Local and Telnet Mangement
156
Viewing the MAC Addresses of a VLAN
The procedure in this section can be useful if you created VLANs on the
switch and want to view the MAC addresses of the nodes of a particular
VLAN. (This procedure is not of much value if the switch contains only
the Default VLAN, in which case displaying the entire MAC Menu, as
explained earlier in this chapter, produces the same result.)
Note
To perform this procedure, you need to know the VID number of the
VLAN whose MAC addresses you wish to view. To obtain a VLAN’s
VID, refer to Displaying VLAN Information on page 139.
To view the MAC addresses of a VLAN on the switch, perform the
following procedure.
1. From the Main Menu, type 6 to select MAC Menu.
2. From the MAC Menu, type 6 to select Show MAC addresses by VLAN ID.
The following prompt is displayed:
Please enter a VLAN ID: [1 to 2048] ->
3. Enter the VID of the desired VLAN and press the Enter key.
The management software displays a window with a list of the
MAC addresses of the nodes in the VLAN. For an example of the
window and for definitions of the columns, refer to the Show all
MAC addresses window on Viewing MAC Addresses on page
150.