Allied Telesis AT-S25 - Manual (Page 267)

AT-S25 Management Software User’s Guide
267
Configuring IGMP Snooping
To configure IGMP snooping from a web browser management
interface, perform the following procedure:
1. From the Home page, select Configuration.
The Configuration window is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
IGMP tab.
The IGMP window in Figure 109 is displayed.
Figure 109 Configuration - IGMP Window
3. Adjust the IGMP parameters as necessary.
The parameters are described below:
PARAMATER DESCRIPTION
Enable IGMP
Snooping Status Enables and disables IGMP snooping on the stack. A
check in the box indicates that IGMP is enabled.