Allied Telesis AT-S25 - Manual (Page 140)

Section II: Local and Telnet Mangement
140
Deleting a VLAN
Note
You need to know the VID of the VLAN you wish to delete to perform
this procedure. To obtain a VLAN’s VID, refer to the procedure
Displaying VLAN Information on page 139.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 1 to select VLAN Definition.
3. From the VLAN Definition menu, type 3 to select Delete VLAN.
The Delete VLAN menu in Figure 49 is displayed.
Figure 49 Delete VLAN Menu
4. Type 1 to select Select VLAN ID (VID) to delete.
The following prompt is displayed:
Enter new value -> [2 to 2048] ->
5. Enter the VID of the VLAN you wish to delete and press the Enter key.
Note
You could not delete the Default_VLAN, which has a VID of 1.
The specifications of the selected VLAN are displayed. Use this
window to confirm that you are deleting the correct VLAN.
6. Type D to delete the VLAN or R to cancel the procedure.