Allied Telesis AT-S25 - Manual (Page 241)

AT-S25 Management Software User’s Guide
241
Displaying RSTP Status and Settings
Displaying
Bridge’s RSTP
Status and
Settings
To display a bridge’s STP parameter status and settings, perform the
following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Layer 2 tab.
3. From the Layer 2 window, select the Spanning Tree tab.
The Spanning Tree window in Figure 89 is displayed.
Figure 93 Monitoring - Spanning Tree Window
Displaying
Port’s RSTP
Status and
Settings
To display the port’s RSTP status or settings, perform the following
procedure:
1. From the graphical image of an AT-8324 Ethernet switch in the
Spanning Tree window displayed in Figure 89; select a port or a group
of ports you wish to display the status or settings.
The selected port(s) will turn white. (To deselect a port, click it
again.)