Allied Telesis AT-S25 - Manual (Page 87)

AT-S25 Management Software User’s Guide
87
Creating a Port Mirror
To create a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Ports Menu.
2. From the Ports Menu, type 2 to select Port Mirroring.
The Port Mirroring menu in Figure 26 is displayed.
Figure 26 Port Mirroring Menu
3. Type 1 to select Enable/Disable.
The following prompt is displayed.
Enter Enable (E)/Disable (D):
4. Type E to enable the port mirroring feature or D to disable the port
mirroring feature. Press the Enter key.
5. If the port mirroring is enabled. The additional options displayed in
this window are described in the table below:
PARAMETER DESCRIPTION
2 - Destination
Module
Mirror module to which traffic will be sent to. This
module cannot be part of a trunk or be one of the
mirroring ports.