Allied Telesis AT-S25 - Manual (Page 178)

Section II: Local and Telnet Mangement
178
Clearing Switch Statistics
To clear Ethernet statistics for an entire switch, perform the following
procedure:
1. From the Main Menu, type 7 to select Ethernet Statistics.
2. From the Ethernet Statistics menu, type M if you wish to select a
module other than the one currently displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
3. Enter the ID of the module you wish to select, and press the Enter key.
4. From the Ethernet Statistics menu, type 3 to select Clear Module
Statistics.
The following prompt is displayed:
Ethernet statistics successfully cleared for module
1
5. Press any key to continue.