Allied Telesis AT-S25 - Manual (Page 223)

AT-S25 Management Software User’s Guide
223
Deleting a Port Trunk
To delete a port trunk, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Trunking tab.
The Port Trunking tab window in Figure 81 on page 220 is
displayed with the configuration of previously created trunks.
4. From the Port Trunking tab window, click to select the trunk number
you wish to delete.
5. Click Remove.
The selected port trunk is immediately deleted from the switch.