Allied Telesis AT-S25 - Manual (Page 187)

AT-S25 Management Software User’s Guide
187
Uploading
Configuration
File to TFTP
Server
To upload a configuration file to the TFTP server on an AT-8316F or an
AT-8324 Switch, perform the following procedure:
1. From the Main Menu, type 4 to select Administration Menu.
2. From the Administration Menu, type D to select Downloads & Uploads
Menu.
3. To upload a new configuration file onto the switch, type 3 to select
Upload Configuration to TFTP Server.
The following prompt is displayed:
TFTP Server IP Address :
4. Enter the IP address of the TFTP server. The following prompt is
displayed:
Remote File Name:
5. Enter the directory path and file name of the configuration file that
you wish to upload; then press the Enter key.
Once the filename has been specified, the upload begins.
Uploading a configuration file takes only a few moments.