Allied Telesis AT-S25 - Manual (Page 60)

Section II: Local and Telnet Mangement
60
Note
The example Port Configuration window in the figure above is for a
10/100 Mbps twisted pair port. The window for a fiber optic port will
contain a subset of the parameters.
7. Enter or modify the parameters in the window as desired.
Changes to the parameters take effect immediately on the switch.
The parameters are described in the table below:
PARAMETER DESCRIPTION
0 - Name The name of the selected port.
1 - State Sets the current state of the selected port or the first
port in the selected range.
Possible settings for this parameter are:
• Enable (default)
• Disable
2 - Broadcast
Filter Sets the selected port to receive broadcast traffic.
Possible settings for this parameter are:
• Enable
• Disable (default)