Allied Telesis AT-S25 - Manual (Page 210)

Section III: Web Browser Management
210
The Settings for Port window is displayed. An example of the
window is shown in Figure 76.
Figure 76 Example of Settings for Port(s) Window
Note
Clicking Default returns the port settings to the default values.
Default values are listed in Appendix A, AT-S25 Default Settings
on page 273.
6. Enter or modify the port parameters as desired.
The parameters are described in the table below:
Parameter DESCRIPTION
Disable Port Enables or disables a port. A disabled port will not
accept or transmit frames.
Possible settings for this parameter are:
• Disable
• Enable (default)
Disable
Broadcast Filter Enables or disables the broadcast filter for the selected
port.
Possible settings for this parameter are:
• Disable (default)
• Enable