Allied Telesis AT-S25 - Manual (Page 171)

AT-S25 Management Software User’s Guide
171
Note
Selections 5 and 6 in the menu are discussed later in this chapter.
4. After making the desired changes, type S to select Save Configuration
changes.
Changes to the parameters take effect immediately on the stack.
4 - Maximum
Multicast
Groups Specifies the maximum number of multicast groups the
stack will learn. The range is 1 to 2048 groups. The
default is 256 multicast groups.
This parameter is useful with networks that contain a
large number of multicast groups. You could use the
parameter to prevent the stack’s MAC Address Table
from filling up with multicast MAC addresses, leaving
no room for dynamic or static MAC addresses. The
range is 1 address to 2048 addresses. The default is 256
multicast addresses.
PARAMETER DESCRIPTION