Allied Telesis AT-S25 - Manual (Page 188)

Section II: Local and Telnet Mangement
188
Transferring Files Using HyperTerminal Interface
This section contains the procedure for downloading or uploading a file
using the Hilgraeve HyperTerminal program.
1. From the HyperTerminal main window, select the Transfer menu.
2. Select Send File from the Transfer pull-down menu, as shown in Figure
64.
Figure 64 Local Management Window
The Send File window in Figure 65 on page 188 is displayed.
Figure 65 Send File Window
3. Click the Browse button and specify the location and file to be
downloaded onto the switch.
4. From the Protocol pull-down menu, select Xmodem or 1K XModem
as the transfer protocol. For faster transfer, 1K XModem is preferable.
5. Click Send.