Allied Telesis AT-S25 - Manual (Page 248)

Section III: Web Browser Management
248
Deleting VLANs
To delete a VLAN from the switch, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select Layer 2.
3. From the Layer 2 window, select the VLAN tab.
The VLAN window in Figure 95 on page 244 is displayed.
4. Click the circle next to the name of the VLAN you wish to delete.
5. Click Remove.
A confirmation prompt in Figure 98 is displayed.
Figure 98 Deleting VLAN Confirmation Prompt
6. Click OK to delete the VLAN or Cancel to cancel the procedure.
If you click OK, the VLAN is deleted from the switch. The untagged
ports in the VLAN are returned to the Default_VLAN as untagged
ports.
Note
You could not delete the Default_VLAN.
To delete all VLANs from the switch, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select Layer 2.
3. From the Layer 2 window, select the VLAN tab.
The VLAN tab window in Figure 95 on page 244 is displayed.
4. Click Clear All.