Allied Telesis AT-S25 - Manual (Page 209)

AT-S25 Management Software User’s Guide
209
Configuring Port Parameters
To configure the parameter settings for a port on a switch, perform the
following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Setting tab.
The Port Settings window is shown in Figure 75.
Figure 75 Configuration - Port Settings Window
A graphical image of an AT-8316F or an AT-8324 Fast Ethernet
Switch is displayed.
4. Select a port that you wish to configure.
The selected port turns white. You could select more than one
port at a time to configure. (To deselect a port, click it again.)
5. Click Modify.