Allied Telesis AT-S25 - Manual (Page 131)

AT-S25 Management Software User’s Guide
131
3. From the VLAN Definition menu, type M if you wish to select a module
other than the one currently displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
4. Enter the ID of the module you wish to select, and press the Enter key.
5. From the VLAN Definition menu, type 1 to select Create VLAN.
The Create VLAN window in Figure 45 is displayed.
Figure 45 Create VLAN Menu
6. From the Create VLAN window, type M if you wish to select a module
other than the one currently displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
7. Enter the ID of the module you wish to select, and press the Enter key.
8. Change the VLAN’s information as desired.