Allied Telesis AT-S25 - Manual (Page 227)

AT-S25 Management Software User’s Guide
227
Deleting a Port Mirror
To delete a port mirror, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Mirroring tab.
The Port Mirroring window in Figure 84 on page 225 is displayed.
4. To disable port mirroring, perform the following steps:
❑ Make sure that the Enable Port Mirroring check box is not
selected.
❑ Select None from the Source’s Port pull-down menu.
5. Click Apply.
The port mirror is deleted. The port that was functioning as the
mirror port can now be used for normal network operations.