Allied Telesis AT-S25 - Manual (Page 226)

Section III: Web Browser Management
226
The Port Mirroring window in Figure 85 is displayed:
Figure 85 Port Mirroring Window - Enabled
2. In the Destination (Mirror) and Source (Mirroring) sections, use the
Module’s and the Port’s pull-down menus to select the ports to
function as the port mirror. The functionality of these menus are
described in the table below:
3. Click Apply.
Changes to the port are immediately activated on the switch. You
could now connect a data analyzer to the mirror port to monitor
the traffic on the selected ports.
PARAMETER DESCRIPTION
Destination
- Module Mirror module to which traffic will be sent to. This
module cannot be part of a trunk or be one of the
mirroring ports.
Destination
- Port Mirror port to which traffic will be sent to. This port
cannot be part of a trunk or be one of the mirroring
ports. Possible settings for this parameter are:
• None (default)
• 1 to 24
Source - Module Mirroring module whose traffic needs to be mirrored.
Source - Port Mirroring port whose traffic needs to be mirrored.
Possible settings for this parameter are:
• None (default)
• 1 to 24