Allied Telesis AT-S25 - Manual (Page 169)

AT-S25 Management Software User’s Guide
169
Activating IGMP Snooping
To activate or deactivate IGMP snooping on the stack and to configure
IGMP snooping parameters, perform the following procedure:
1. From the Main Menu, type 5 to select System Config Menu.
2. From the System Config Menu, type A to select Advanced
Configuration.
3. From the Advanced Configuration window, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu in Figure 57 is displayed.
Figure 57 IGMP Snooping Configuration Menu
The options displayed in the IGMP Snooping Configuration window are
described in the table below:
PARAMETER DESCRIPTION
1 - IGMP
Snooping
Status Enables and disables IGMP snooping on the stack. After
selecting this option, type E to enable or
D to disable
this feature.