Allied Telesis AT-S25 - Manual (Page 112)

Section II: Local and Telnet Mangement
112
Figure 38 Configure RSTP Port Settings Menu
11. Enter or modify the parameters in the window as desired.
For description of the parameters displayed in this window, refer
to Table 5, STP and RSTP Parameters on page 100.
12. After making your changes, type S to select Save Configuration
changes.
Note
All changes to a port’s RSTP settings, with the exception of port cost,
are activated immediately. A change to the port cost value requires
you to reset the switch. A new port cost value is not implemented
until the unit is reset.