HP 3PAR Remote Copy Software - Manual (Page 96)

3.34 Synchronous Long Distance Remote Copy Setup
Remote Copy User’s Guide InForm OS Version 2.3.1
◆ IP states that this is an IP link.
◆ specifies the node that contains the IP connections to the target (for example
0:1:1 and 1:3:2).
◆ is the link IP address for the target system (for example, 10.100.33.195
and 10.101.33.195).
3.6.3 Verifying Synchronous Long Distance Remote Copy Setup
X To verify the Synchronous Long Distance Remote Copy setup on the primary and backup
servers, issue the showrcopy command on InServA, InServB, and InServC.
◆ On InServA:.
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServB 6 FC ready 2FF70002AC0000C3 mirror_config
InServC 7 IP ready mirror_config
Link Information
Target Node Address Status Options
InServB 0:1:1 20210002AC0000C3 Up
InServB 1:3:2 21210002AC0000C3 Up
InServC 2:4:1 10.100.33.63 Up
InServC 3:4:1 10.101.33.63 Up
receive 0:1:1 20210002AC0000C3 Up
receive 1:3:2 21210002AC0000C3 Up
receive 2:4:1 receive Up
receive 3:4:1 receive Up