HP 3PAR Remote Copy Software - Manual (Page 199)

B.63 showrctransport
InForm OS Version 2.3.1 Remote Copy User’s Guide
■ Peer_Address . IP address of the Remote Copy storage server port connected to this
Remote Copy port.
■ Address . IP address of the Remote Copy storage server port.
■ State . Remote copy end-to-end transport state. Can include one of the following results:
◆ new . Configuration is not completed on this port.
◆ incomplete . Configuration is not yet completed on the peer port.
◆ ready . Configuration is completed on this port and the peer port; transport is ready for
use.
◆ missing . A configured transport was disconnected.
■ Type . Indicates the port connection type.
◆ rcip . Port is used for Remote Copy over IP (RCIP).
◆ rcfc . Port is used for Remote Copy over FC (RCFC).
The following example displays status and information about the end-to-end transport for
RCIP ports:
The columns in the previous example are identified as follows:
■ N:S:P . The physical position of the port, in the syntax node:slot:port .
■ State . Remote copy end-to-end transport state. Can include one of the following results:
◆ new . Configuration is not completed on this port.
◆ incomplete . Configuration is not yet completed on the peer port.
◆ ready . Configuration is completed on this port and the peer port; transport is ready for
use.
◆ missing . A configured transport was disconnected.
■ HwAddr . Hardware address of the Ethernet port indicated in the N:S:P column.
cli% showrctransport -rcip
N:S:P State HwAddr IPAddress PeerIPAddress Netmask Gateway MTU Rate Duplex
0:1:1 new 000423C21B72 192.168.25.226 - 255.255.255.0 - 1500 1Gbps Full
0:1:1 new 000423C21B73 192.168.25.226 - 255.255.255.0 - 1500 n/a Half
1:2:1 new 000423ADE95E 192.168.25.227 - 255.255.255.0 - 1500 1Gbps Full
1:2:1 new 000423ADE95F 192.168.25.227 - 255.255.255.0 - 1500 n/a Half