HP 3PAR Remote Copy Software - Manual (Page 146)

B.10 controlport
Remote Copy User’s Guide InForm OS Version 2.3.1
■ controlport rcip ping [-c |-w |-s |-pf]
...
■ controlport rcfc init [-f]
■ controlport rcfc delete [-f]
AUTHORITY
Super, Service
SUBCOMMANDS
config
Sets the specified connection mode and type on FC ports. Also allows setting the unique
node WWN option for the port. When unique_nwwn is enabled, the port presents a unique
node name on the connection and this is needed by certain initiators such as ONTAP.
rst
Resets a port.
offline
Holds the specified port offline indefinitely. Issue controlport rst to bring the port
back online.
lip
Specifies that a Loop Initialization Primitive (LIP) command is issued from the port if there is
a private loop topology. If the -c option is specified, then the LIP command is issued
through the specified drive cage. If there is a point-to-point topology, then the link is reset.
If there is a public loop or fabric topology, then a Registered State Change Notification is
issued to the fabric controller.
ct
Sets the connection type. The specified port will be reset.Note that this option is
deprecated and will be removed in a subsequent release.
NOTE: You need access to all domains in order to run this command.