HP 3PAR Remote Copy Software - Manual (Page 251)

C.33 1-to-N Unidirectional Asynchronous Periodic Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
2 On the failover system, verify the reversal by issuing the showrcopy command and
checking that the Role for the group is now Primary-Rev, as shown in bold in the
following example:
3 After the failed system (InServ1) has been restored, issue the setrcopygroup recover
command on the failover system to resynchronize the servers.
On InServ2:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ1 7 IP failed mirror_config
Link Information
Target Node Address Status Options
InServ1 0 10.100.33.61 Down
InServ1 1 10.101.33.61 Down
receive 0 10.100.33.61 Down
receive 1 10.101.33.61 Down
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 InServ1 Stopped Primary-Rev Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 21 localvv.0 413 Stopped Thu Dec 14 18:23:52 PST 2006
remotevv.1 22 localvv.1 414 Stopped Thu Dec 14 18:23:52 PST 2006
On InServ2:
# setropygroup recover -t InServ1