HP 3PAR Remote Copy Software - Manual (Page 127)

InForm OS Version 2.3.1 Remote Copy User’s Guide
A.1
Quick Setup Guide
A
Quick Setup Guide
This Quick Setup Guide summarizes the commands required to set up storage server pairs for
the use of 3PAR Remote Copy.
Refer to Chapter 3, Remote Copy Setup or Chapter 4, Remote Copy in Domains for detailed
setup instructions and to Appendix B, Remote Copy Commands for command syntax.
This guide is divided into four sections:
■ Setting Up the Remote Copy Transport Layer for RCIP on page A.2 summarizes how to
configure the Remote Copy transport layer for Remote Copy over IP (RCIP).
■ Setting Up the Remote Copy Transport Layer for RCFC on page A.3 summarizes how to
configure the Remote Copy transport layer for Remote Copy over Fibre Channel (RCFC).
■ Setting Up Remote Copy on page A.3 summarizes how to set up Remote Copy connections
between the storage server pair and then start the use of Remote Copy.
■ Setting Up Synchronous Long Distance Remote Copy on page A.7 summarizes how to set
up Synchronous Long Distance Remote Copy connections between the storage server pairs
and then start the use of Remote Copy.