HP 3PAR Remote Copy Software - Manual (Page 118)

4.12 Remote Copy Commands
Remote Copy User’s Guide InForm OS Version 2.3.1
NOTE: As long as you are using 3PAR Remote Copy with the default group policy
enabled (see Setting Remote Copy Volume Group Policies on page 4.4), the
configuration commands, in the following table, followed by an asterisk (*) need
only be issued on the primary storage system, as they are automatically mirrored
to the secondary system.
Table 4-2. Remote Copy Tasks and Associated Commands
Task Command
Creates a link to a target system. admitrcopylink
Adds a target to an InServ Storage Server. admitrcopytarget *
Adding an existing virtual volume to an existing
Remote Copy volume group.
admitrcopyvv *
Sets Remote Copy interface information. controlport rcip|rcfc
controlport config
Creates a Remote Copy volume group (can be
run by users with Edit privileges.)
creatercopygroup *
Identifies the targets within a Remote Copy pair
and makes additional links.
creatercopytarget
Removes a sending link that was created with
the admitrcopylink command.
dismissrcopylink
Removes a target from an InServ Storage Server. dismissrcopytarget
Removes a virtual volume from a Remote Copy
volume group.
dismissrcopyvv *
Increases the size of a virtual volume. growvv
Deletes a Remote Copy volume group. (Can be
run by users with Edit privileges.)
removercopygroup *