HP 3PAR Remote Copy Software - Manual (Page 231)

C.13 Bidirectional Synchronous Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
6 Restore the direction of the system by issuing the setrcopygroup restore command on
the failover system.
7 Issue the showrcopy command to verify that the direction of InServ2 has been restored
and group sync_group_1.r96 displays as Secondary, as shown in bold in the following
example:
On InServ2:
# setrcopygroup restore -t InServ1
On InServ2:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ1 2 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ1 0 10.100.33.96 Up
InServ1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
sync_group_1.r96 InServ1 Started Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 375 localvv.0 413 Synced Thu Dec 14 18:01:12 PST 2006
remotevv.1 376 localvv.1 414 Synced Thu Dec 14 18:01:13 PST 2006
Name Target Status Role Mode Options
sync_group_2 InServ1 Stopped Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 385 remotevv.0 423 Stopped Thu Dec 14 17:51:48 PST 2006
localvv.1 386 remotevv.1 424 Stopped Thu Dec 14 17:51:44 PST 2006