HP 3PAR Remote Copy Software - Manual (Page 239)

C.21 N-to-1 Asynchronous Periodic Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
the failed target InServ1 for the secondary group primary_group_1.r96 on InServ2
using the setrcopygroup failover command as follows:
2 On the failover system, verify the reversal by issuing the showrcopy command and
checking that the Role for the group is now Primary-Rev, as shown in bold in the
following example:
On InServ1:
# setrcopygroup failover -t InServ2
On InServ1:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ2 7 IP failed mirror_config
InServ3 8 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ2 0 10.100.33.96 Down
InServ2 1 10.101.33.96 Down
InServ3 0 10.100.33.11 Up
InServ3 1 10.101.33.11 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 InServ2 Stopped Primary-Rev Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 21 localvv.0 413 Stopped Thu Dec 14 18:23:52 PST 2006
remotevv.1 22 localvv.1 414 Stopped Thu Dec 14 18:23:52 PST 2006
Name Target Status Role Mode Options
periodic_group_2.r11 InServ3 Started Secondary Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.2 23 localvv.0 385 Synced Thu Dec 14 18:23:45 PST 2006
remotevv.3 24 localvv.1 386 Synced Thu Dec 14 18:23:44 PST 2006